Pressure compensation elements made of stainless steel
![Pressure compensation elements made of stainless steel](https://www.industriegehaeuse.de/fileadmin/_processed_/d/a/csm_druckausgleichselement_1_01_aa2f1923c6.jpg)
Achievable IP tightness with this pressure compensation elements: IP66, IP68 and IPX9-k. This is possible by a membrane foil which is permeable to air on both sides and permeable to water only for one side.
Different versions are available
- material made of stainless steel V2A (1.4305),
stainless steel V4A (1.4404)
- length of the thread (6,6mm/ 10mm/ 0.25 inch/ 0.39 inch)
- locknut available
![Drawing wrench size](https://www.industriegehaeuse.de/fileadmin/_processed_/a/9/csm_schluesselweite_zeichnung_2659197f24.jpg)
![Drawing DAE](https://www.industriegehaeuse.de/fileadmin/_processed_/8/b/csm_es_zeichnung_c0d18f893f.jpg)
Item number | material | for thread | wrench size | L | H |
GH02/DAE/M/M12 | stainless steel V2A | M12x1,5 | 17 | 10 mm/ 0.39 inch | 21 mm/ 0.82 inch |
GH02/DAE/M/M12/1 | stainless steel V2A | M12x1,5 | 17 | 6,6 mm/ 0.25 inch | 17 mm/ 0.66 inch |
GH02/DAE/EXM/M12a* | stainless steel V2A* | M12x1,5 | 17 | 10 mm/ 0.39 inch | 21 mm/ 0.82 inch |
GH02/DAE/EXM/M12b* | stainless steel V2A* | M12x1,5 | 17 | 10 mm/ 0.39 inch | 21 mm/ 0.82 inch |
GH02-DAE-M-M-GM | stainless steel V2A | M12x1,5 | 15 | 2,8 mm/ 0.11 inch | |
GH02/DAE/M/M12a | stainless steel V4A | M12x1,5 | 17 | 10 mm/ 0.39 inch | 21 mm/ 0.82 inch |
GH02-DAE-M-M-GMa | stainless steel V4A | M12x1,5 | 15 | 2,8 mm/ 0.11 inch | |
* Explosion-protected versions of stainless steel. Approval: Ex II 2G Ex e IIC Gb / Ex II 2D Ex tb IIIC DbIBExU 10 ATEX 1169 U temperature range -40 ° C to + 100 ° C |